No heating system in Murfreesboro is perfect, and eventually, you’ll have to find a heating replacement when your furnace starts to wear out. If a gas furnace is your heating system of choice, you’ll still have to figure out which model is right for your house or place of business. Gas furnaces come in different styles, including standard, two-stage, and modulating. If you’re not sure which kind of heating system will serve you best, the cooling and heating experts would be happy to help you decide. Keep reading for help determining what type of gas furnace you should choose.
A single-stage, or standard heating system offers no control over the amount of gas that flows into the furnace. It uses a physical gas valve to release gas at a high rate, and it’s not quite as efficient as many of its alternatives. This is probably not the right choice for people who want to save money on their energy bills, but it can be a useful heating system for people who live in mild climates. If you do want to save on your energy bills and don’t live in a mild climate, a standard gas furnace probably won’t be your ideal choice.
Unlike a standard single-stage heating system, a two-stage furnace can be operated at either half power or full power. The furnace will start at half power, which can be enough to get the job done on winter days that aren’t too cold. It communicates with the thermostat to tell when to kick into full power. When it runs at half power, it’ll run the heating cycle for a longer duration, meaning more heat will circulate around your house. This kind of heating system is a bit more efficient than a standard furnace.
A modulating gas furnace will be more efficient than both of the aforementioned options. It will constantly check the temperature and decide how much gas is necessary for the home to be properly heated. Modulating systems keep your home comfortable and your energy bills reasonable, and they’re a great choice for cold climates.
When you mix water and metal, sometimes you’re going to get rust. It’s a good idea to keep an eye on your heating system in Murfreesboro to make sure rust doesn’t build up. Regular maintenance and inspections make it easier to notice problems with your furnace before they get too serious. Rust and scale buildup is common because of the combination of water vapor and natural gas combustion. You can keep your furnace running and your energy bills down by maintaining your heating system and dealing with rust quickly. Continue reading for more on why rust is bad for your furnace.
Natural gas combusts inside your furnace in order to provide your home with heat, and the mixture of this burning with water vapor will lead to rust. When the scale of the rust falls and ends up on the burners, gas won’t flow the right way. This means your heating system will suffer a dramatic loss of efficiency, and your energy bills will go up by a wide margin. It will also continue to collect moisture and collect more and more rust, which only makes the problem worse. Set up a maintenance plan with your heating experts to avoid rust problems.
The more you know about your heating system in Murfreesboro, the easier it will be to notice when there’s an issue to fix. There are many components that allow your furnace to operate properly, and one of them is your limit switch. The first thing you should know about your heating system’s limit switch is where to find it. Knowing what it does and how it works also makes it easier to notice when it’s malfunctioning, so you can let your heating experts know that there’s a problem. Read on for a lesson in furnace anatomy and get to know your limit switch.
Knowing How to Find It
It’s hard to understand how your heating system works if you don’t have any idea how the different parts come together. Furnaces aren’t all that difficult to understand, and it can help the heating experts if you know how to tell if each part is functioning correctly. If you want to find your limit switch, look for a temperature sensor on a mounting plate. The mounting plate is attached to the outside of the furnace and has several wire terminals for the fan and gas valve. The temperature sensing probe goes through the wall of the furnace housing. You can usually find the limit switch above the heat exchanger in the hot-air supply plenum.
Understanding What It Does
Now that you know where your limit switch is, you should know what it’s responsible for. The limit switch works in conjunction with the blower fan. You don’t want to start circulating air as soon as you turn the furnace on because the air won’t be warm yet. The limit switch is what tells the blower to turn on once the system is hot enough. Then the air is blown through the heat exchanger and throughout the house.
Recognizing Signs of a Problem
If your blower fan doesn’t turn off, your limit switch could be the problem. Sometimes a malfunctioning limit switch will put your heating system out of commission entirely. In this case you should talk to your heating experts for assistance.
Is your furnace failing to turn on and leaving you wondering if you may need a heating replacement in Murfreesboro ? If so, then you may enjoy learning a bit about how these units function. Continue reading for a quick introduction to types of furnace ignition systems.
A standing pilot is the oldest type of furnace ignition system and one that many people are familiar with. If your heating system has a standing pilot ignition system, then you should see a continuous blue flame burning if it is working properly. If your standing pilot will not ignite, then try resetting it. Otherwise, there may be something wrong with its thermocouple component, which is responsible for detecting whether the pilot light is lit or not.
A furnace with an intermittent pilot ignition system is one that runs on gas but has an electronic ignition system. Unlike with a traditional, standing pilot light, this type of ignition system uses an electrical spark to ignite the gas pilot, and it will only ignite the pilot when the thermostat signals the unit to produce heat. Because it only runs the pilot light when needed, an intermittent pilot ignition system is typically found in newer, more energy-efficient heating systems, and these pilot ignition systems can be more reliable than traditional ones. If your pilot light won’t ignite, then try resetting it by turning it off for five to ten minutes and then turning it on again.
Hot surface ignition is another type of ignition system that relies on electricity to ignite. However, as opposed to intermittent pilot ignition systems, hot surface ones have a resistance heating element that warms up whenever the thermostat signals a need for heat. If you have this type of ignition system and you’re wondering whether it is working, then simply look for light, as you will be able to see a red-orange glow coming from the device when a hot surface ignition system is on.
Installing a new furnace is not your typical DIY job. Proper installation is challenging, and if it is done incorrectly, it could even lead to risks like carbon monoxide leaks. Don’t risk it when you get a new furnace. Let heating experts in Murfreesboro handle the installation for you, so all you have to do it sit back and enjoy your comfortable home. Here is a look at some of the benefits of professional heating installation.
Improved Energy Efficiency
When you attempt to install your new furnace yourself, all it takes is one misstep to make your heating function less efficiently than it should. Even a minor reduction in efficiency can add up to a major expense for you in the long run, as your energy bills begin to rise. When you leave the installation to a professional team, you can be sure that it will be set up to give you the maximum amount of efficiency possible.
Better System Longevity
If your furnace is not installed properly, it means that it will start out its life not working properly. Over time, the system will be under an excessive amount of pressure, which means it will wear out soon than it would have had it been set up the right way from the beginning. Because new furnaces are such huge investments, don’t take the risk of needing a new one before you would have if you had allowed a qualified heating expert to handle the installation.
In addition to the extra expense that comes with a poorly installed heating system, a furnace that isn’t working up to its full potential won’t keep your home as comfortable as it should. After investing in a new furnace, you want to enjoy the warmth it provides instead of feeling just as chilly as before. A professional team can ensure that your heating installation is done exactly right so that your home is ready for cold winter nights.
The last thing you want to discover in the middle of winter is that you need a new furnace. By paying attention to the warning signs of problems with your furnace, you may be able to realize that it’s time for a replacement before you need emergency service. Make sure your heating system in Murfreesboro is ready for winter by keeping an eye out for these signs of a furnace failure.
Your pilot light is yellow.
A yellow pilot light is not just a sign that your furnace is failing—it could also be a sign of an emergency for your family. A pilot light on a furnace that is operating as it should will be blue. A yellow light could indicate that you have a carbon monoxide leak. If you see a yellow light, get out of the house and call your heating experts right away. Additional signs of a carbon monoxide leak include a rotten egg smell and condensation or rust around your furnace.
Your heating bills are soaring.
A sudden increase in heating bills is a sign that your furnace is not working as efficiently as it used to. This could be the result of a minor issue that can easily be repaired, or it could be the sign of a major furnace failure that requires replacement. Take action quickly if your heating bill suddenly seems to be more than it should be, so you can avoid overpaying for energy costs associated with an inefficient system.
The air coming out of the heating system is cold.
If the air feels cold when your heat comes on, your furnace is to blame. The same applies if your air doesn’t feel as warm as it used to, or if no air comes out at all when you turn on your heating. Cold air is always a sign of a serious furnace problem, so make an appointment for an inspection as soon as possible.
Choosing the right heating system in Murfreesboro keeps your home efficient and comfortable, but you need to think about the type of filter you’ll use as well. Your filter keeps contaminants out of the air so you can enjoy top-notch indoor air quality and a heating system that functions wonderfully. Watch this video clip to find out which furnace filter you should choose.
It’s common to see forced air systems in modern homes, but what does this mean for your HVAC maintenance? You’ll need to find a quality filter to keep dander, allergens, and other debris out of your air. First, look at the filter that you already have in place to find the size. Then you can go out and purchase a new filter of the same size, but stay away from filters that are transparent. Opt for a pleated filter instead, especially if it has an electrostatic charge.
Your new heating system in Murfreesboro will only operate at peak efficiency if you take the proper steps to maintain it, which involves cleaning or replacing the filter on a regular basis. Sometimes it turns out that your filter doesn’t quite cut it, however, at which point it’s a good idea to upgrade. Watch this video to see if it’s time for you to upgrade your furnace filter.
The purpose of your furnace filter is to keep contaminants away from the mechanical components of your furnace and out of your air. If there is too much space between the fibers of your filter, it won’t do a good job of keeping these components out. Poor indoor air quality is one sign that your furnace filter might need some attention, so consider upgrading to a polyester electrostatic filter. This is a permanent filter that can pay for itself in savings.
Your heating system is important to the comfort of your home, but problems can disrupt that comfort and cause significant repairs and damages. Weird noises, malfunctioning pilot lights, and dirty filters are some of the most common problems that heating experts near Murfreesboro see every day. Here is a better look at top furnace problems and how they can affect your home.
Strange sounds from your furnace could signal a serious problem. If you hear rattles, squeaks, clunks, or rumbling, then a heating expert should be out soon to inspect the unit. These sounds may be a sign of a clogged burner or a mechanical issue. Your heating system should be inspected soon to rule out a serious repair or potentially dangerous heating issue.
Your air conditioning filters and furnace filters should be changed out throughout the year. When your furnace is not in regular use, then change the filters every three to four months. When your furnace is in use during the winter, though, change the filter every month. Changing the filters keeps your indoor air quality healthy, and it prevents your cooling and heating systems from overworking. Changing the filters regularly can also keep your energy costs low throughout the year.
Malfunctioning Pilot Lights
The pilot light is essential to your furnace’s daily function. If the pilot light goes out, then your furnace will not heat your home. A malfunctioning pilot light can also cause potential dangers to you and your family. The pilot light runs off gas, and malfunctions could cause the gas to continue flowing without a flame. If unlit gas flows through your home, then you and your family could be at risk for carbon monoxide poisoning.
Furnaces can last up to 20 years with regular maintenance. However, they will eventually need to be replaced. If your furnace has reached the end of its life, or if it requires frequent repairs, then start looking for a heating replacement. Your heating expert can help you choose the correct model for your home.
Furnace repair technicians in Murfreesboro see a lot of different problems every day. However, they also run into a lot of the same problems. That’s because nearly all furnaces are plagued by a lot of the same common issues. For example, the number one cause of furnace failure is a dirty filter. Poor ventilation is another common problem furnace owners experience, especially in the Midwest and Eastern United States where snowfall can block furnace ventilation pipes. Watch this video to learn more about these and other common furnace problems and how to prevent them.
If your furnace is acting up, contact a furnace repair professional in your area as soon as possible. The sooner you allow a trained HVAC technician to diagnose your furnace problems, the sooner you can get back to enjoying a warm and comfortable home. Contact an HVAC repair contractor in your area today to request a quote and schedule service.
- Furnace Repairs
- Heating Repair
- duct cleaning
- HVAC maintenance
- Indoor Air Quality
- Air Duct Cleaning
- Air Conditioner Maintenance
- HVAC Contractor
- Furnace Maintenance
- About Us
- Energy Efficiency
- Water Heater
- Air Conditioner
- Air Filters
- HVAC company
- HVAC System
- AC installation
- air conditioning maintenance
- Air Conditioners
- Furnance Maintenance
- AC repair
- water heater installation
- water heater maintenance
- water heater repairs
- Customer Reviews